IDP-0155S COVER STRIP [ALUMINIUM] [60MM] [POLISH SILVER] - 30507
Chat with us
Choose options
Professional Floor Transition That Works as Hard as You Do
The IDP-0155S aluminium cover strip is a premium-grade, 60mm wide floor transition trim engineered to bridge and conceal expansion gaps between same-height flooring surfaces. Crafted from extruded aluminium in a refined Polish Silver finish, this 2.5-metre flat cover strip delivers professional-grade edge protection, moisture resistance, and a seamless visual flow, making it the ideal flooring transition solution for both residential and commercial environments.
| Key Features | Perfect For |
|---|---|
|
|
- Heavy-Duty Extruded Aluminium Body: The IDP-0155S is manufactured from high-grade extruded aluminium — a material chosen for its exceptional strength-to-weight ratio, corrosion resistance, and long service life even under sustained foot traffic. At 3.2mm thick, the profile resists bending, deformation, and surface scratching that would compromise cheaper alternatives over time.
- 60mm Wide Seamless Surface Bridge: At a full 60mm width, this cover strip is specifically designed to span wider-than-standard expansion gaps between adjacent flooring panels. It overlaps the raw material edges of both surfaces cleanly, eliminating the exposed gap that would otherwise collect dirt, moisture, and debris — and creating a continuous, flush walking surface from one room to the next.
- Edge and Moisture Protection: Raw flooring edges — whether timber, laminate, LVT, or ceramic — are inherently vulnerable to chipping, delamination, and moisture ingress. The IDP-0155S physically shields these cut edges, preventing water from penetrating the subfloor at transition points and stopping mechanical wear from foot traffic that gradually degrades unprotected edges.
- Low-Profile Flush Installation with Pre-Punched Fixing Slots: The strip's slim, low-rise cross-section (3.2mm profile height) sits flush against the floor surface once installed, removing any raised lip that could cause tripping or snag on wheeled furniture and equipment. Evenly spaced, pre-punched mounting slots along the full 2500mm length allow for quick mechanical fixing with floor screws or bonding with construction adhesive — ensuring a secure, perfectly aligned result without specialist tools.
- Polish Silver Finish — Dimensions 3.2 x 60mm, Length 2500mm, Weight 0.235kg: The satin-polished silver anodised surface provides a sophisticated, contemporary aesthetic that integrates cleanly with stainless steel fixtures, grey and neutral interior palettes, and modern flooring materials such as large-format porcelain tiles, engineered oak, and luxury vinyl plank. The full 2.5-metre run minimises joins in standard doorways and room transitions, and the 0.235kg net weight keeps the strip manageable during solo installation.
The IDP-0155S Cover Strip comes supplied as a single 2500mm aluminium strip (1 piece) per pack — ready to cut to length on site using a standard metal-cutting mitre saw or hacksaw. Installation can be completed using concealed floor screws through the pre-punched slots or a suitable contact or construction adhesive for a fully mechanical-free finish.
General Purchase & Comparison Queries
What is the difference between a cover strip and a T-bar or threshold strip?
A cover strip like the IDP-0155S is a flat, single-piece profile that sits on top of the floor surface and overlaps both edges of an expansion gap — it does not interlock with a separate base rail. A T-bar typically uses a two-part system (base track + top cap) and is better suited to floating floors that require the trim to move with the floor. The IDP-0155S is mechanically fixed or adhesive-bonded directly to the substrate, making it the stronger, lower-profile choice for fixed flooring transitions in residential and commercial settings.
Why choose aluminium over PVC or stainless steel for a floor cover strip?
Aluminium offers an optimal balance of durability, weight, and aesthetics. Compared to PVC, aluminium resists permanent deformation under heavy loads and does not discolour or become brittle over time. Compared to stainless steel, aluminium is significantly lighter and easier to cut on site with standard tools, while still offering excellent corrosion resistance. The Polish Silver anodised finish of the IDP-0155S also provides a premium surface that holds up to daily cleaning without dulling.
Is one 2.5-metre strip enough for a standard doorway transition?
For the vast majority of standard interior doorways — which typically range from 800mm to 1000mm in width — a single 2500mm IDP-0155S strip provides more than enough material, with significant offcuts available for use elsewhere. For wider openings such as double doors, open-plan dividers, or commercial passages, you may require two lengths. The strip cuts cleanly with a metal-cutting mitre saw or fine-tooth hacksaw, so on-site sizing is straightforward.
Product-Specific and Usage Queries
What floor types can the IDP-0155S cover strip be used with?
The IDP-0155S is designed for same-height floor transitions and is compatible with a wide range of hard flooring materials including ceramic and porcelain tile, engineered wood, solid hardwood, laminate, luxury vinyl plank (LVP/LVT), and natural stone. It is suitable wherever two flooring surfaces of equal finished height meet and an expansion gap needs to be bridged and concealed — such as room-to-room transitions, doorway thresholds, and hallway junctions.
How is the IDP-0155S installed — screw-fixed or adhesive?
The IDP-0155S features pre-punched fixing slots evenly distributed along its 2500mm length, allowing two installation methods. For mechanical fixing, floor screws are driven through the slots into the substrate — ideal for concrete or timber sub-floors where a permanent, load-bearing bond is required. For adhesive installation, a suitable construction or contact adhesive applied to the underside of the strip eliminates visible fixings entirely for a cleaner aesthetic. Both methods are suitable for residential and commercial use; mechanical fixing is generally recommended for high-traffic commercial environments.
Can the IDP-0155S be cut to a shorter length on site?
Yes. The 2500mm aluminium strip can be trimmed to any required length using a standard metal-cutting mitre saw, angle grinder with a metal disc, or a fine-tooth hacksaw. Aluminium cuts cleanly and without the risk of splintering. It is recommended to lightly deburr the cut end with fine sandpaper or a metal file before installation to ensure a clean finish and prevent sharp edges. The strip's 0.235kg net weight makes it easy to handle and manoeuvre during cutting and fitting.
Problem/Solution-Oriented Queries
My floor transition gap is wider than usual — will the 60mm cover strip be sufficient?
The IDP-0155S at 60mm wide is specifically designed for broader-than-standard expansion gaps and provides significantly more coverage than the typical 30–40mm strips used in standard applications. In most residential and commercial scenarios, a 60mm strip will comfortably conceal gaps up to approximately 40–50mm, as the strip overlaps onto the finished floor surface on each side. If your gap exceeds this range, it is advisable to consult a flooring professional, as unusually large gaps may indicate a substrate or installation issue that should be addressed before fitting any trim.
Will the Polish Silver finish match my existing door hardware and skirting?
The Polish Silver anodised finish of the IDP-0155S is a clean, neutral satin-silver tone that coordinates well with brushed nickel, chrome, and satin stainless steel door handles, hinges, and fixtures commonly used in contemporary interiors. It is a versatile, mid-tone metallic that works particularly well alongside grey, white, and stone-coloured interior schemes. If your existing hardware is a warm gold, bronze, or matte black, a finish-matched alternative may be more suitable — our range includes additional colour options for different interior palettes.
Can moisture or cleaning liquids damage the aluminium cover strip over time?
No — anodised aluminium is inherently resistant to moisture, humidity, and the cleaning agents used in standard residential and commercial floor maintenance. The anodising process creates a hard, sealed oxide layer on the surface that prevents corrosion and staining even in environments subject to regular wet mopping, spills, or high humidity such as kitchens, bathrooms, and entryways. For long-term appearance, simply wipe the strip with a damp cloth and mild detergent — avoid abrasive pads that could scratch the polished surface.
IDP-0155S Cover Strip (1 Pcs)