![IDEAL TCT BLADE [WOOD] [12" X 80T] [35MM BORE] [IGS PRO] MITRE SAW ACCESSORY - 26259](http://www.idealpowertools.com/cdn/shop/files/12in80TBlade.jpg?v=1756547198&width=4436)
![IDEAL TCT BLADE [WOOD] [12" X 80T] [35MM BORE] [IGS PRO] MITRE SAW ACCESSORY - 26259](http://www.idealpowertools.com/cdn/shop/files/TCTWOODCUTTINGBLADE12X80TMockup.jpg?v=1756547198&width=4903)
![IDEAL TCT BLADE [WOOD] [12" X 80T] [35MM BORE] [IGS PRO] MITRE SAW ACCESSORY - 26259](http://www.idealpowertools.com/cdn/shop/files/IDEAL_IGS_PRO_TCT_WOOD_WORKING_ALUMINIUM_BLADES_61629bec-d77f-418a-9e97-0f0dc613a9c2.jpg?v=1768915822&width=1673)
IDEAL TCT BLADE [WOOD] [12" X 80T] [35MM BORE] [IGS PRO] MITRE SAW ACCESSORY - 26259
Chat with us
Choose options
Engineered for Precision. Built to Last.
The IDEAL TCT Blade for Mitre Saw is a professional-grade 305mm (12") tungsten carbide tipped circular saw blade engineered for woodworkers who demand ultra-fine, splinter-free cuts. With 80 precision-ground TCT teeth, a 35mm bore, and a maximum cutting speed of 4,500 RPM, this blade delivers consistent, smooth results across hardwood, softwood, MDF, and engineered timber, making it the go-to mitre saw blade for cabinetmakers, joiners, and serious DIY enthusiasts.
| Key Features | Perfect For |
|---|---|
|
|
- 80-Tooth TCT Configuration for Flawless Surface Finishes: The high tooth count of 80 tungsten carbide tipped teeth reduces the chip load per tooth, producing exceptionally smooth cut faces with minimal tear-out, critical when cutting pre-finished timber, veneered MDF, or fine hardwoods where surface quality directly affects the final product.
- 305mm (12") Full-Size Diameter for Maximum Cutting Depth: The 305mm blade diameter is the industry standard for professional 12-inch mitre saws, enabling deep bevel cuts, wide crosscuts, and compound angles on large-section timber without multiple passes, saving time and improving accuracy on the job site or in the workshop.
- 35mm Bore for Broad Compatibility: The 35mm arbor bore is a widely adopted standard across European and Asian power tool platforms, ensuring this blade fits a broad range of professional and semi-professional mitre saws. The included washer set allows for secure, vibration-free mounting on compatible machines.
- 4,500 RPM / 80 m/s Rated for High-Speed Safety and Performance: With a maximum operating speed of 4,500 RPM (80 m/s peripheral velocity), this blade is rated to handle the full power output of professional 12-inch mitre saws without risk of over-speeding, a critical safety and performance specification that ensures the blade remains stable and true at full load.
- Tungsten Carbide Tips for Extended Service Life: Each tooth is tipped with industrial-grade tungsten carbide, one of the hardest cutting materials available. Compared to standard high-speed steel blades, TCT tips resist heat build-up, maintain their edge geometry significantly longer, and can be professionally resharpened multiple times, delivering a lower cost-per-cut over the blade's working life. The blade ships complete with a washer set for immediate installation.
General Purchase & Comparison Queries
What makes the IDEAL TCT Blade different from a standard mitre saw blade?
The key difference lies in the tooth material and count. Standard blades use high-speed steel (HSS) teeth, which dull quickly on hardwoods and engineered timber. The IDEAL TCT Blade uses tungsten carbide tipped (TCT) teeth — a far harder material that retains its cutting edge significantly longer, even under continuous use. Combined with an 80-tooth configuration, it produces a much finer, smoother cut than typical 24- or 40-tooth general-purpose blades, making it the right choice when surface finish quality matters.
Is this blade compatible with my mitre saw?
This blade is designed for 12-inch (305mm) mitre saws with a 35mm arbor bore. This bore size is standard across many professional European and Asian mitre saw brands. A washer set is included to ensure a secure, correctly centred fit. Always verify your saw's required blade diameter and bore size in its manual before fitting any blade.
Can this blade be resharpened when it becomes dull?
Yes. Tungsten carbide tipped blades can be professionally resharpened, typically multiple times before the tips are too worn to restore. This is a significant advantage over disposable HSS blades. We recommend having the blade resharpened by a qualified saw doctor or blade sharpening service when you notice increased cutting resistance, burning on the cut face, or reduced cut quality — rather than waiting until the blade is completely blunt.
Product-Specific and Usage Queries
What types of wood can this blade cut?
The IDEAL TCT Blade is optimised for wood and wood-based materials, including solid hardwoods (oak, walnut, teak), softwoods (pine, cedar), MDF, plywood, chipboard, and veneered panels. The 80-tooth count is specifically suited to materials where a clean, splinter-free finish is required — such as pre-finished boards, door linings, skirting, and furniture components. It is not intended for cutting metal, masonry, or plastics.
What is the maximum safe operating speed for this blade?
The blade is rated to a maximum of 4,500 RPM, which corresponds to a peripheral velocity of 80 m/s. Never exceed this speed rating. Always check that your mitre saw's no-load speed does not exceed the blade's maximum RPM before fitting. Operating a blade beyond its rated speed is a serious safety hazard and will void any warranty.
How do I install the blade correctly on my mitre saw?
Ensure the saw is fully disconnected from power before changing the blade. Remove the existing blade, then fit the IDEAL TCT Blade onto the arbor with the blade rotation arrow matching the direction of your saw's spindle rotation (typically shown on the blade body and in your saw's manual). Use the included washer set to seat the blade correctly, then tighten the arbor nut to the manufacturer's specified torque. Do not overtighten. Reconnect power only after the blade guard is fully reinstalled.
Problem/Solution-Oriented Queries
My cuts are leaving burn marks on the wood. What is causing this?
Burn marks are most commonly caused by one of three issues: a dull or dirty blade, feeding the material too slowly through the cut, or using a blade with too few teeth for the material. If your blade is coated in resin or pitch build-up, clean it with a dedicated blade cleaner. If the tips are worn, have the blade resharpened. The 80-tooth TCT configuration of this blade is specifically designed to minimise heat build-up and burning on fine woodworking cuts — if burning persists after cleaning, the blade likely needs resharpening.
The blade is vibrating excessively during cuts. What should I check?
Excessive vibration is usually caused by an incorrectly fitted or unbalanced blade. First, check that the blade is properly seated on the arbor using the included washer set and that the arbor nut is tightened correctly. Inspect the blade for any visible damage such as missing or chipped teeth, which can cause imbalance. Also verify that the blade diameter and bore are correct for your saw. If vibration continues after checking all of the above, stop use immediately and consult a qualified technician.
I am getting splintering or tear-out on the underside of my cuts. How do I fix this?
Tear-out on the underside of a cut is a common issue with lower tooth-count blades. The 80-tooth configuration of this blade is engineered to minimise this by taking smaller, more frequent chips — reducing the force applied to individual wood fibres. If you are still experiencing tear-out, ensure you are using a zero-clearance insert on your mitre saw if available, support the workpiece fully on both sides of the cut, and feed the material at a steady, controlled pace rather than forcing the cut. Applying masking tape along the cut line on delicate veneered surfaces can also help.
Blade (1 Pcs), Washer (1 Set)