ID WM450E [1M EARTH CLAMP | 1.5M HOLDER | MASK | BRUSH] ELECTRIC WELDING MACHINE [G-240V] - 30290

Built To Hold The Arc When The Job Gets Heavy

The ID WM450E Electric Welding Machine is a 450 amp inverter arc welder engineered for workshops that weld thick steel all day and cannot afford downtime. Powered from a single-phase AC 220V supply and fitted with a Type G British 3-pin plug, this heavy duty stick welding machine combines a broad 40-450A current range, anti-stick arc control and a double insulated IP21S body. It arrives as a complete kit with a 1m earth clamp, 1.5m electrode holder, welding mask and brush, ready to work straight out of the carton.

• 450A ultra-high output backed by 14.8 kVA input capacity: the 40-450A adjustable current range gives supreme power handling for thick-gauge fabrication yet dials down smoothly for finer repair passes, so a single machine serves the whole shop floor.
• 60% duty cycle at full 450A: designed for high-volume productivity with a sustained 60% duty cycle at maximum power and roughly 349A at a continuous 100% duty cycle, cutting the cool-down pauses that slow long production runs.
• 60V no-load voltage for instant arc ignition: a steady 60V open-circuit voltage guarantees rapid, clean arc starts, and paired with anti-stick it sharply reduces electrode sticking and wasted rods.
• ±15% voltage tolerance on single-phase AC 220V: built-in circuit protection rides out the voltage fluctuations typical of generators and busy site supplies, operating at 50/60Hz with Class F insulation for high thermal endurance.
• Rugged IP21S housing with forced wind cooling: a weather-resistant IP21S enclosure shields the electronics from vertical water droplets and job-site debris while a high-velocity fan stabilises internal temperatures under intense load.
• 2.5-3.2mm electrode capacity and continuous welding: accepts the most common 2.5mm to 3.2mm electrodes and supports continuous welding with shielded weld-pool protection for consistent, low-spatter beads.

Each unit ships as a complete working set containing the welding machine, a guide book, a 1m earth clamp, a 1.5m electrode holder, a welding mask and a cleaning brush, so nothing extra is needed before the first weld. The ID WM450E is built under an ISO 9001:2015 Quality Management System and holds CE (Machine Test) conformity certification, confirming it has been tested against recognised safety and quality standards for professional industrial use.

• Heavy Duty: This product is powered by innovative technology and is engineered to outlast.
• Double Insulation: This product is designed in such a way that the electrical parts can never come into contact with the outer casing.
• Anti-Stick: Anti-Stick allows the stick welding electrode to be easily detached if it begins to stick to the job.
• Continuous Welding: This product enables continuous wire welding in which the protection of the weld pool is ensured by a covering gas, flowing from the torch onto the piece to be welded.
• Advanced Inverter Technology: Engineered with professional-grade D.C. welding inverter technology to provide a highly stable arc and exceptional energy efficiency for industrial-standard results.
• 450A Ultra-High Output: Delivers a massive, top-tier current output range from 40A up to 450A, offering supreme power handling for heavy-duty, thick-gauge metal fabrication.
• 60% Industrial Duty Cycle: Built for high-volume productivity, supporting a sustained 60% duty cycle at full 450A power and an impressive 349A output at a continuous 100% duty cycle.

Rated Input Voltage: AC220V | ±15%
Phase: 1 Phase
No-load Voltage (V): 60
Current Range (A): 40-450
Rated Frequency (Hz): 50/60
Rated Duty (%): 50
Input Capacity (kVA): 14.8
Class of Insulation: F
Electrode Diameter (mm): 2.5-3.2
Housing Type: IP21S
Cooling Way: Wind

Machine (1 Pcs), Guide Book (1 Pcs), 1m Earth Clamp (1 Pcs), 1.5m Electrode Holder (1 Pcs), Welding Mask (1 Pcs), Brush (1 Pcs)