ID VR860 [WITHOUT SHAFT] ELECTRIC CONCRETE VIBRATOR MACHINE [G-240V] - 28728
ID VR860 [WITHOUT SHAFT] ELECTRIC CONCRETE VIBRATOR MACHINE [G-240V] - 28728
ID VR860 [WITHOUT SHAFT] ELECTRIC CONCRETE VIBRATOR MACHINE [G-240V] - 28728
ID VR860 [WITHOUT SHAFT] ELECTRIC CONCRETE VIBRATOR MACHINE [G-240V] - 28728
ID VR860 [WITHOUT SHAFT] ELECTRIC CONCRETE VIBRATOR MACHINE [G-240V] - 28728

ID VR860 [WITHOUT SHAFT] ELECTRIC CONCRETE VIBRATOR MACHINE [G-240V] - 28728

Dhs. 70.00 Dhs. 100.00
SKU: 28728
Quantity:
Fallback Image Fallback Image Fallback Image Fallback Image
BUY ON AMAZON!
Only 5 units left
Chat with us

Professional Concrete Compaction, Built for the Demands of the Job Site

Compact freshly poured concrete with professional-grade precision using the ID VR860 Electric Concrete Vibrator Machine, a 860W heavy-duty vibrator engineered for construction, civil engineering, and building projects requiring air-free, high-density concrete structures. Powered at 220–240V with a 4,000 RPM no-load speed and a 35mm vibrating rod, this machine delivers consistent compaction performance with double insulation for operator safety. Supplied with a Type G (British 3-Pin) plug, it is ready for use across the UAE and GCC markets.

Key Features Perfect For
  • 860W High-Performance Motor for powerful, consistent vibration output
  • 4,000 RPM No-Load Speed ensuring rapid and thorough concrete compaction
  • 35mm Vibrating Rod designed to penetrate and consolidate concrete efficiently
  • Double Insulation — electrical components fully isolated from the outer casing for safe operation
  • Type G Plug (220–240V / 50–60Hz) — compatible with UAE, UK, and GCC power standards
  • Compacting slabs, columns, beams, and foundations on construction sites
  • Civil engineering projects requiring void-free, high-strength concrete pours
  • Precast concrete manufacturing and formwork applications
  • Building contractors and site engineers needing reliable daily-use equipment
  • Heavy-duty DIY projects involving structural concrete work
  • 860W Rated Power Input — The ID VR860 draws 860 watts of power, delivering sustained vibration energy capable of penetrating deep into freshly poured concrete to eliminate entrapped air bubbles and water pockets that weaken the final structure.
  • 4,000 RPM No-Load Speed with 35mm Rod — Operating at up to 4,000 revolutions per minute, the 35mm vibrating rod generates high-frequency oscillations that rapidly consolidate concrete mix around rebar and into tight formwork corners, producing a dense, uniform pour every time.
  • 220–240V / 50–60Hz Dual-Frequency Compatibility — Rated for both 50Hz and 60Hz electrical systems at 220–240V, the VR860 operates reliably across UAE, GCC, and UK power grids without the need for a voltage converter, making it a versatile choice for multi-site contractors.
  • Double Insulation Safety Design — Engineered with a double-insulated construction, the machine ensures that all live electrical components are completely separated from the outer housing. This eliminates the risk of electric shock even in wet or damp concrete environments, meeting the safety demands of professional job sites.
  • Without-Shaft Configuration for Flexible Pairing — Supplied as a motor unit without a flexible shaft, the VR860 is designed to be paired with a compatible vibrating shaft and poker head of your choice, giving contractors the flexibility to select the rod diameter and length best suited to their specific pour depth and formwork geometry.
  • Heavy-Duty Build for Continuous Operation — Constructed with industrial-grade components and powered by innovative motor technology, the VR860 is engineered to withstand the rigours of continuous on-site use, resisting heat build-up and mechanical wear across extended pours and high-volume concrete placement tasks.

The ID VR860 carries a double insulation certification, confirming its compliance with electrical safety standards for power tools used in construction environments. Each unit is supplied with the Machine (1 Pc) and a Guide Book (1 Pc) to assist with setup, operation, and basic maintenance, ensuring operators can get started safely and efficiently straight out of the box.

General Purchase & Comparison Queries

What is included with the ID VR860 and is a flexible shaft provided?

The ID VR860 is supplied as a motor unit only (without shaft). Each purchase includes the Machine (1 Pc) and a Guide Book (1 Pc). A compatible flexible shaft and vibrating poker head must be sourced separately, giving you the freedom to select the shaft length and poker diameter that best suits your project requirements.

Is the ID VR860 compatible with UAE and GCC power supplies?

Yes. The VR860 is rated at 220–240V / 50–60Hz and comes fitted with a Type G (British 3-Pin) plug, which is the standard plug type used across the UAE, GCC countries, and the UK. No adapter or voltage converter is required for use on standard UAE site power.

How does the ID VR860 compare to lower-wattage concrete vibrators?

The 860W motor and 4,000 RPM no-load speed of the VR860 place it firmly in the professional-grade category. Lower-wattage units (typically 550–700W) are suited to light or occasional use, while the VR860 is built for continuous operation on active construction sites, handling larger pours, denser mixes, and deeper formwork with greater efficiency and less motor strain over time.

Product-Specific and Usage Queries

What does "without shaft" mean and how do I use this machine?

A concrete vibrator system consists of two parts: the motor/drive unit and the flexible shaft with poker head. The ID VR860 is the motor unit only. To operate it, you connect a compatible flexible shaft (sold separately) to the motor's drive coupling. The shaft transmits the motor's rotational energy into the poker head, which is then inserted into the concrete to generate the compacting vibrations.

What is the significance of the 35mm rod length specification?

The 35mm figure refers to the vibrating rod/poker diameter this motor unit is designed to drive. A 35mm poker is well-suited to medium-density pours, columns, beams, and wall panels where the formwork spacing allows insertion of the head. Smaller pokers (25–30mm) suit tighter reinforcement, while larger pokers (50mm+) are used for mass concrete pours such as slabs and footings.

Is the ID VR860 safe to use in wet concrete environments?

Yes. The VR860 is built with double insulation, meaning all live electrical components are fully enclosed and isolated from the outer casing. This design ensures that even in the damp, wet conditions typical of active concrete pours, the operator is protected from electric shock. It is a standard safety requirement for professional-grade power tools used on construction sites.

Problem/Solution-Oriented Queries

My concrete is showing honeycombing after curing — can the VR860 prevent this?

Honeycombing (voids and porous patches in cured concrete) is almost always caused by inadequate compaction during the pour. The ID VR860, operating at 4,000 RPM, generates high-frequency vibrations that cause the concrete mix to flow around rebar and into all corners of the formwork, eliminating entrapped air and water pockets before the concrete sets. Consistent use of the vibrator during each pour layer significantly reduces or eliminates honeycombing.

The motor feels hot during extended use — is this normal?

Some heat generation is normal during sustained operation of any electric motor. The VR860 is built with heavy-duty components engineered for continuous use, but it is good practice to allow the motor to rest periodically during very long pours. Ensure the ventilation slots on the motor housing are not blocked, and always operate within the rated voltage range of 220–240V to avoid overloading the motor. If excessive heat or burning smell occurs, stop use and consult the included Guide Book or contact support.

I am getting weak vibration output — what should I check?

Weak vibration is most commonly caused by one of three issues: a loose or worn connection between the motor and the flexible shaft, a bent or damaged shaft, or under-voltage at the power supply. First, check that the shaft coupling is firmly seated and undamaged. Then verify your site supply is delivering a stable 220–240V — voltage drops on long extension leads are a common cause of reduced motor performance. If the issue persists, inspect the shaft for kinks or wear and replace if necessary.