ID PRO ARMATURE [ID BL1100] AIR BLOWER SPARE PART - 28468
Chat with us
Choose options
Restore Peak Blower Performance with a Precision-Engineered OEM Armature
The ID PRO Armature for the ID BL1100 Air Blower (Part No. 28468) is an OEM-grade power tool spare part engineered to restore your blower to full operating capacity. As the central electromechanical component of the motor, this replacement armature features a precision-wound copper coil, a hardened magnetic core, and a machined commutator, together converting electrical energy into the high-speed rotational force that drives the blower's impeller. Built to exacting tolerances, it delivers the consistent performance and long service life demanded by professional contractors, maintenance teams, and power tool repair specialists.
| Key Features | Perfect For |
|---|---|
|
|
- Exact-fit OEM compatibility: Designed and manufactured specifically for the ID BL1100 1800W Electric Air Blower, Part No. 28468 slots into the motor housing without modification, preserving the original shaft alignment and brush seating geometry for a reliable, drop-in repair.
- High-conductivity copper winding: The armature's precision-wound copper coil minimises resistive losses during operation, ensuring the motor converts the full 1800W input into maximum airflow output while managing thermal load — critical for preventing repeat winding failure in demanding blower applications.
- Hardened magnetic core for sustained field integrity: The laminated silicon-steel magnetic core is engineered to maintain consistent flux density across extended run cycles, preventing the magnetic saturation and eddy-current losses that commonly degrade aftermarket alternatives under continuous professional use.
- Machined commutator for stable electrical contact: Each commutator segment is precision-turned and undercut to specification, guaranteeing even carbon brush wear, reduced electrical arcing, and a longer service interval between brush replacements — directly extending the working life of your ID BL1100 motor assembly.
- Dynamically balanced rotor shaft: The armature shaft is dynamically balanced to tight tolerances, eliminating the micro-vibration that accelerates bearing wear and brush chatter in high-RPM blower motors. This results in quieter operation and a measurably longer mean time between failures (MTBF) for the entire motor unit.
- Comes with a Guide Book (1 piece) to support correct installation, ensuring technicians follow the proper fitting sequence, torque specifications, and run-in procedure — reducing the risk of premature failure caused by incorrect assembly.
General Purchase & Comparison Queries
Is this armature a genuine OEM part or an aftermarket replacement?
This is an OEM-grade replacement armature (Part No. 28468) manufactured to the exact specifications of the original ID BL1100 Air Blower motor. It uses the same precision-wound copper coil, hardened magnetic core, and machined commutator geometry as the factory-fitted unit, ensuring a true like-for-like repair rather than a compromise-grade aftermarket substitute.
Which ID air blower models is this armature compatible with?
This armature is designed and verified for the ID BL1100 1800W Electric Air Blower. Always cross-reference the part number 28468 against your blower's model plate before ordering. If you are unsure whether this armature fits a variant or successor model, contact our team with your tool's full model number for confirmation.
Why should I replace the armature instead of buying a new blower?
Replacing the armature spare part is significantly more cost-effective than purchasing an entirely new unit, especially for professional-grade equipment. A burnt-out or worn armature is one of the most common motor failure points, and a targeted replacement restores the blower to full original performance at a fraction of the cost of a new machine — reducing both downtime and capital expenditure.
Product-Specific and Usage Queries
What does the armature do inside the ID BL1100 blower motor?
The armature is the rotating core of the electric motor. It receives electrical current through the carbon brushes via the commutator, which — in combination with the stator's magnetic field — generates the electromagnetic force that spins the rotor shaft. This shaft drives the blower's impeller, producing the high-velocity airflow the tool is designed to deliver. Without a functional armature, the motor cannot rotate and the blower produces no output.
Does this spare part come with installation guidance?
Yes. The package includes a Guide Book (1 piece) covering the correct installation sequence for the armature within the ID BL1100 motor assembly. Following the guide's torque specifications and run-in procedure is essential to prevent premature failure and to ensure the commutator seats correctly against the carbon brushes from the first power cycle.
What are the signs that my ID BL1100 armature needs replacing?
Common indicators of armature failure include: the blower motor failing to start despite power being present; excessive sparking at the brush contact area; a burning smell or visible scorch marks on the motor windings; significantly reduced airflow or intermittent operation; and unusual grinding or rattling from the motor. If carbon brush replacement does not resolve these symptoms, the armature itself is likely the cause.
Problem/Solution-Oriented Queries
My ID BL1100 runs hot and has reduced power — will a new armature fix this?
Excessive heat combined with reduced output is a classic symptom of degraded or shorted armature windings. When winding insulation breaks down, current leaks between coils, reducing torque while dramatically increasing heat generation. Fitting a new OEM-spec armature (Part No. 28468) with fully intact, precision-wound copper coils restores correct current flow and eliminates the thermal runaway caused by the failed windings.
The blower motor sparks heavily at the brushes — is the armature the problem?
Heavy sparking at the brush contact zone can indicate a worn or out-of-round commutator, open-circuited armature windings, or contamination between commutator segments. If new carbon brushes do not resolve the sparking, the commutator surface or the windings themselves are the likely fault. Replacing the armature with this machined-commutator OEM part restores clean electrical contact and eliminates the arc-over condition.
Can I install this armature myself or do I need a professional technician?
Armature replacement requires basic disassembly of the motor housing, careful handling of the rotor and brush assembly, and correct reassembly to maintain shaft alignment. The included Guide Book outlines the procedure step-by-step. Technicians with experience in power tool motor repair will find this a straightforward task. For users without prior motor repair experience, engaging a qualified power tool service centre is recommended to ensure the armature is fitted correctly and the blower is safe to operate post-repair.