ID PCS22 GASOLINE CHAINSAW MACHINE [GASOLINE] - 28443

The ID PCS22 is well-suited for both professional and serious semi-professional use. Its 45CC engine, 1800W power output, and 10,000 RPM chain speed place it firmly in the professional-grade segment. It is capable of sustained cutting in forestry, construction site clearing, and landscaping operations. While it is compact and lightweight at 5.5 kg, making it accessible for experienced homeowners with large properties, its power specifications and dual safety switch design reflect a tool built for demanding, repeated use rather than occasional garden trimming.

A 45CC gasoline chainsaw like the ID PCS22 offers significant advantages over electric models for outdoor and remote applications. Unlike electric chainsaws, the PCS22 requires no power cord or battery charge, giving you complete freedom of movement in forests, construction sites, or rural properties. The gasoline engine delivers higher sustained torque, making it more effective for felling large trees and cutting through dense hardwood. Electric saws are generally quieter and lower maintenance, but they cannot match the raw power and portability of a petrol-driven unit for heavy-duty, extended cutting sessions.

The ID PCS22 ships as a complete, ready-to-assemble package. Included in the box are the chainsaw machine unit, a detailed guide book, a fuel bottle for field use, a 22-inch bar guard, a 22-inch chainsaw chain, and a full assembly kit. The only consumable you will need to source separately is the gasoline-oil fuel mixture at a 25:1 ratio (25 parts petrol to 1 part two-stroke engine oil). Once assembled per the guide book instructions, the machine is ready for immediate operation.

The ID PCS22 requires a 25:1 fuel-to-oil ratio, meaning 25 parts unleaded petrol mixed with 1 part two-stroke engine oil. This ratio is critical because the two-stroke engine in this chainsaw does not have a separate oil reservoir — the oil mixed into the fuel is the sole source of lubrication for the engine's internal components. Using the incorrect ratio — too little oil — can cause rapid engine wear or seizure, while too much oil can foul the spark plug and reduce performance. Always use a quality two-stroke engine oil and mix the fuel in a clean, dedicated container before filling the tank.

The ID PCS22 features a 400mm (approximately 16-inch) maximum cutting bar length. As a general rule, a chainsaw can effectively fell or cross-cut a tree with a diameter up to approximately the length of the guide bar, meaning logs and trunks up to roughly 35–40 cm in diameter can be handled in a single pass. For larger diameter trees, experienced operators can use a two-cut technique — cutting from both sides — to extend the effective cutting range. The 10,000 RPM chain speed ensures the chain moves efficiently through the cut, even in dense or green timber.

The dual safety switch on the ID PCS22 is a two-step activation system designed to prevent accidental chain engagement. The operator must simultaneously activate two separate controls — typically a throttle interlock and the main trigger — before the chain will begin moving. This means that if the saw is dropped, bumped, or handled carelessly, the chain will not engage unintentionally. This feature is especially important in professional and outdoor environments where the operator may be working in awkward positions, on uneven terrain, or in physically demanding conditions where accidental activation poses a serious safety risk.

Difficulty starting a gasoline chainsaw is most commonly caused by a few easily resolved issues. First, verify that the fuel mixture is correct at 25:1 and that the fuel is fresh — stale petrol (older than 30 days) can cause hard starting or no-start conditions. Second, check that the choke is set to the correct position for a cold or warm start as described in the guide book. Third, inspect the spark plug for fouling or carbon build-up, which is common if the oil ratio was too rich. Finally, ensure the air filter is clean and unobstructed. If the issue persists after checking these points, consult the included guide book or contact your authorised service centre.

A loose or inefficient chain is a common maintenance issue that is straightforward to resolve. The ID PCS22 features an adjustable chain tension system — refer to the included guide book for the specific tensioning procedure for your model. As a general rule, the chain should be snug against the guide bar but still able to be pulled around the bar by hand with light resistance. A chain that sags away from the bar is dangerously loose and must be tightened before use. Additionally, if the chain is cutting slowly or producing fine dust rather than wood chips, the chain teeth may be dull and require sharpening or replacement with a new 22-inch chain compatible with this model.

If the engine is running but the chain remains stationary at idle, this is normal and expected behaviour — the centrifugal clutch on a gasoline chainsaw is designed so the chain only engages when the engine reaches a higher RPM under throttle. If the chain does not engage even when the throttle is fully applied, the issue may be a worn or damaged centrifugal clutch, a seized chain or bar due to insufficient bar oil, or a disengaged chain brake that has been triggered. Check that the chain brake is fully released (pushed forward) and that the bar and chain are properly lubricated. If the problem persists, the unit should be inspected by a qualified technician.