IDEAL HOSE PIPE [ID HSP8] [8 METER] PRESSURE WASHER ACCESSORY - 25848

The ID HSP8 uses an M22x1.5 threaded connector, which is the most widely adopted standard across consumer and professional pressure washers and jet cleaners globally. The vast majority of brands — including common household and contractor-grade models — use this thread specification. We recommend verifying your machine's inlet thread size before purchase; if it is M22x1.5, this hose will connect directly without any adapter.

An 8-metre hose length provides approximately 26 feet of operational reach, which is the practical minimum for cleaning full-sized vehicles, long driveways, and building facades without moving the pressure washer unit mid-task. Shorter hoses (typically 3–5 metres) require frequent repositioning, which interrupts workflow and increases fatigue. The ID HSP8 strikes the optimal balance between reach and manageable hose weight for both residential and professional use.

The ID HSP8 ships as a complete, ready-to-connect unit. The package includes one high-pressure hose pipe with the 15mm connector pre-fitted. For machines with a standard M22x1.5 inlet, no additional adapters or fittings are required. Simply attach one end to your pressure washer outlet and the other to your lance or gun, and you are ready to operate.

A kink-resistant hose is constructed from a reinforced compound that maintains its circular cross-section even when bent sharply around corners, dragged over edges, or coiled during storage. When a standard hose kinks, the internal bore collapses, blocking water flow and causing dangerous pressure spikes back into the pump. The ID HSP8's kink-resistant architecture prevents this entirely, ensuring consistent, uninterrupted water delivery at full pressure throughout the cleaning session — and significantly extending the working life of both the hose and your pressure washer pump.

Yes. The ID HSP8 is engineered with a heavy-duty, abrasion-resistant body and a leak-free precision coupling that together support high-pressure transmission demands typical of industrial and contractor environments. Its CE (Machine Test) certification further confirms it has been independently validated for use with powered pressure washing equipment. It is well-suited for washing construction machinery, industrial vehicles, warehouse floors, and large outdoor surfaces.

The ID HSP8 features a 15mm connector with an M22x1.5 thread pitch. The "M22" refers to a 22-millimetre outer diameter metric thread, and "x1.5" denotes a 1.5mm thread pitch — the standard used across the pressure washer industry. This specification ensures a secure, leak-free mechanical seal when connected to compatible pressure washer inlets and lance fittings.

Leaks at the connection point are almost always caused by worn threads, an incorrect thread pitch, or a poorly machined coupling. The ID HSP8 addresses all three root causes: its 15mm precision connector is machined to tight tolerances for a perfect thread engagement, the M22x1.5 standard pitch ensures correct mating with compatible inlets, and the coupling design creates a hermetically sealed joint that eliminates pressure bleed. If your existing machine uses an M22x1.5 inlet, upgrading to the ID HSP8 should resolve the leak entirely.

Kinking is a structural failure of the hose body — typically caused by thin-walled or low-grade hose compounds that collapse under bending stress. The solution is to replace the hose with one built from a reinforced, kink-resistant material. The ID HSP8 is specifically engineered with a kink-resistant architecture that maintains full bore diameter even under sharp bends and repeated coiling. Switching to the ID HSP8 will restore consistent, uninterrupted water flow and protect your pressure washer pump from the damaging back-pressure spikes that kinking causes.

For the majority of residential and professional applications, 8 metres (approximately 26 feet) provides sufficient reach to clean a full-sized SUV or van from a single machine position, cover a standard double-width driveway, and work along building facades without repositioning. If your work area is exceptionally large, note that pressure washers can typically support hose extensions — however, each additional metre of hose introduces minor pressure loss, so the ID HSP8's 8-metre length is optimised to deliver maximum reach with minimal pressure drop for most real-world cleaning tasks.