ID G10SS ELECTRIC ANGLE GRINDER MACHINE [G-240V] - 20246

Yes. This grinder is built with a heavy-duty 650W motor and an auto-stop carbon brush system that protects the motor from wear — a feature typically found on professional-grade tools. Its double-insulated construction and CE certification further confirm it meets rigorous safety and performance standards. While it is compact and lightweight, it is engineered to handle sustained, demanding workloads in construction, fabrication, and metalworking environments.

Several key engineering decisions set this grinder apart. First, the auto-stop carbon brush set automatically shuts off the motor before internal damage can occur — a feature absent in most budget tools. Second, the double insulation provides a higher level of electrical safety than basic single-insulated designs. Third, the spindle lock mechanism allows for fast, secure disc changes without the risk of the spindle spinning freely. Together, these features translate to a longer tool lifespan, safer operation, and lower long-term cost of ownership.

Yes. The package includes the grinder machine, a side handle for two-handed control, a wheel guard for debris deflection, a spanner for disc changes, an auto-stop carbon brush set for motor protection, and a guide book for setup and safe operation. The tool is also pre-fitted with a Type G British 3-pin plug, so it is ready to plug in and use immediately in the UAE and GCC without any additional adaptors.

This grinder accepts discs with a maximum wheel diameter of 110mm and uses a standard M10 spindle thread. This is a widely available disc size compatible with cutting wheels, grinding discs, flap discs, and wire brushes from most major accessory brands. Always ensure the disc's rated speed exceeds the grinder's 11,000 RPM no-load speed before use.

Yes, with the appropriate disc. When fitted with a diamond cutting disc (sold separately, 110mm, M10 thread), this grinder can score, shape, and cut ceramic tiles, porcelain, and light concrete. The 11,000 RPM speed and 650W motor provide sufficient power for these tasks. Always use the wheel guard and appropriate PPE — safety glasses and gloves — when cutting masonry materials.

Disc changes are straightforward thanks to the spindle lock mechanism. Press and hold the spindle lock button to prevent the shaft from rotating, then use the included spanner to loosen the locking nut. Remove the old disc, fit the new one, and retighten the nut with the spanner while keeping the spindle lock engaged. The entire process can be completed single-handedly and takes under a minute. Always ensure the tool is unplugged from the power supply before changing any accessory.

The most likely cause is the auto-stop carbon brush system doing exactly what it is designed to do. When the carbon brushes wear down to their minimum safe length, the system automatically cuts power to the motor to prevent internal damage. This is not a fault — it is a built-in protective feature. The solution is to replace the carbon brush set. Refer to the included guide book for instructions, or contact your local service centre. Using genuine replacement brushes ensures the auto-stop function continues to operate correctly.

Some heat generation is normal during prolonged operation, as the motor converts electrical energy into mechanical work. However, if the tool becomes uncomfortably hot to the touch, it is advisable to allow it to cool down for 10–15 minutes before continuing. Avoid blocking the ventilation slots on the housing, as airflow is essential for motor cooling. If overheating persists under normal use conditions, discontinue use and have the tool inspected. The double-insulated housing ensures that even if internal temperatures rise, the outer casing remains electrically safe.

Yes, provided the extension lead is rated for the tool's power requirements. The grinder draws up to 650W at 220–240V, which equates to approximately 3 amps. Use an extension lead rated for at least 6 amps with a cable gauge suitable for the lead's length — longer runs require thicker cable to prevent voltage drop and overheating. For outdoor and site use, always use an IP44-rated weatherproof extension lead and connect through an RCD (Residual Current Device) for additional protection against electric shock.