ID CM14Y ELECTRIC PORTABLE SLAB CUTTER MACHINE [G-240V] - 26771
ID CM14Y ELECTRIC PORTABLE SLAB CUTTER MACHINE [G-240V] - 26771

ID CM14Y ELECTRIC PORTABLE SLAB CUTTER MACHINE [G-240V] - 26771

Dhs. 750.00 Dhs. 900.00
SKU: 26771
Fallback Image Fallback Image Fallback Image Fallback Image
Chat with us

Professional Slab Cutting Power — Wherever the Job Takes You

Portable slab cutting meets professional-grade power in the ID CM14Y Electric Portable Slab Cutter Machine, engineered for precise, clean cuts through concrete, asphalt, and stone. Driven by a 4000W motor at 4800 RPM no-load speed and accepting blades up to 355mm, this machine delivers contractor-level performance with minimal setup and vibration. Supplied with a Type G (British 3-Pin) plug, it is ready for UAE, UK, and compatible 220–240V markets straight out of the box.

Key Features Perfect For
  • 4000W rated power input for sustained, high-torque cutting performance
  • 4800 RPM no-load speed enabling fast, clean blade engagement
  • 355mm maximum blade diameter for deep slab and curb cuts
  • Portable, compact design with minimal vibration for reduced operator fatigue
  • 220–240V / 50–60Hz compatibility with Type G plug for UAE and UK markets
  • Construction and concrete cutting professionals
  • Landscapers and paving contractors cutting slabs and pavers on-site
  • Demolition teams requiring fast, portable slab removal
  • Road and asphalt maintenance crews
  • Tile and stone fabrication workshops
  • 4000W High-Torque Motor: The CM14Y's 4000-watt rated power input sustains consistent blade speed under load, preventing stalling when cutting through dense reinforced concrete, thick asphalt, or hard stone pavers, critical for uninterrupted productivity on commercial job sites.
  • 4800 RPM No-Load Speed with 355mm Blade Capacity: Operating at 4800 revolutions per minute with a maximum blade diameter of 355mm (14 inches), the machine achieves deep, straight cuts in a single pass, reducing rework and blade wear on slabs, curbs, and block paving.
  • Portable Field-Ready Design: Built for on-site portability, the CM14Y requires minimal setup time, allowing operators to move between cutting positions quickly. The low-vibration construction reduces hand-arm fatigue during extended use, meeting the demands of landscaping, demolition, and infrastructure projects.
  • 220–240V / 50–60Hz Universal Voltage with Type G Plug: Rated at 220–240V across 50 and 60Hz frequencies and fitted with a Type G British 3-Pin plug, the machine is immediately compatible with UAE, UK, and GCC power infrastructure, no adapters or rewiring required for regional deployment.
  • Diamond Blade or Abrasive Wheel Compatible: The 355mm arbor-compatible blade mount accepts both diamond segmented blades for wet or dry concrete cutting and abrasive cutting wheels for asphalt and masonry, giving operators material-specific flexibility across diverse job site conditions.

The CM14Y ships complete with the machine unit (1 piece) and a Guide Book (1 piece) to support correct setup, blade fitting, and safe operating procedures from first use.

General Purchase & Comparison Queries

Is the ID CM14Y suitable for professional job site use or only light-duty tasks?

The ID CM14Y is built for professional and heavy-duty use. Its 4000W motor and 4800 RPM no-load speed are rated for sustained cutting through reinforced concrete, dense asphalt, and hard stone — materials commonly encountered on construction, demolition, and infrastructure job sites. It is not a light-duty or DIY-grade machine.

What blade size does the CM14Y accept, and does it come with a blade?

The CM14Y accepts blades up to 355mm (14 inches) in diameter. The machine is supplied with the unit and a Guide Book — a blade is not included in the standard package and must be sourced separately based on your cutting material (diamond blade for concrete/stone, abrasive wheel for asphalt).

Is this machine compatible with UAE and UK power supplies?

Yes. The CM14Y is rated at 220–240V / 50–60Hz and is supplied with a Type G British 3-Pin plug, making it directly compatible with UAE, UK, and GCC power infrastructure without requiring an adapter or voltage converter.

Product-Specific and Usage Queries

What materials can the ID CM14Y cut?

The CM14Y is designed to cut concrete, asphalt, stone, slabs, curbs, and pavers. With the correct blade fitted — a diamond segmented blade for concrete and stone, or an abrasive cutting wheel for asphalt — the machine handles a wide range of hard construction materials efficiently.

What is the no-load speed and why does it matter for cutting performance?

The CM14Y operates at 4800 RPM no-load speed. A higher no-load speed means the blade reaches cutting velocity faster and maintains momentum more effectively when engaging hard materials. Combined with the 4000W power input, this ensures the blade does not bog down mid-cut, resulting in cleaner, straighter cuts with less blade wear.

How portable is the CM14Y for on-site use?

The CM14Y is specifically engineered for field portability. Its compact form factor requires minimal setup time, allowing operators to reposition quickly between cuts. The low-vibration design reduces operator fatigue during extended sessions, making it practical for use across multiple locations on large job sites.

Problem/Solution-Oriented Queries

The machine is losing speed mid-cut — what could be causing this?

Speed loss mid-cut is typically caused by one of three factors: a worn or incorrect blade for the material being cut, an undersized power supply or extension lead causing voltage drop, or excessive feed pressure forcing the blade through material faster than the motor can sustain. Ensure you are using the correct blade type for your material, verify your power source meets the 220–240V / 4000W requirement, and allow the blade to cut at its own pace with steady, controlled feed pressure.

My cuts are not straight — how can I improve cutting accuracy?

Inaccurate cuts are usually the result of operator feed angle drift, a damaged blade, or an unsecured workpiece. Mark your cut line clearly before starting, use a straight edge or guide rail where possible, and ensure the slab or paver is stable and cannot shift during cutting. Also inspect the blade for warping or uneven wear — a damaged 355mm blade will track inconsistently regardless of operator technique.

Is excessive vibration during use a sign of a problem?

The CM14Y is designed for low-vibration operation. If you are experiencing excessive vibration, the most common causes are a loose or incorrectly mounted blade, a damaged or unbalanced blade, or worn internal components. Stop operation immediately, power down, and inspect the blade mounting and condition. Refer to the included Guide Book for correct blade installation torque and safety checks before resuming use.