ID CDC130 ELECTRIC CORE DRILL MACHINE [G-240V] - 21663
ID CDC130 ELECTRIC CORE DRILL MACHINE [G-240V] - 21663

ID CDC130 ELECTRIC CORE DRILL MACHINE [G-240V] - 21663

Dhs. 580.00 Dhs. 700.00
SKU: 21663
Fallback Image Fallback Image Fallback Image
Chat with us

Built for the Toughest Cores — Precision Drilling, Every Time

 

The ID CDC130 Electric Core Drill Machine is a professional-grade, 1800W heavy-duty drilling solution engineered for precision and durability on demanding job sites. Designed to drill clean, large-diameter holes up to 130mm in concrete, asphalt, masonry, and stone, this machine delivers variable speeds up to 1200r/min and operates on a 220-240V, 50/60Hz power supply. Featuring double insulation for enhanced operator safety and supplied with a Type G (British 3-Pin) plug, it is the ideal tool for construction professionals, plumbers, and electricians across the UAE and GCC region. Supplied in a metallic carrying case for secure transport and long-term storage.

  • Powerful 1800W Motor with Variable Speed (0–1200r/min): At the heart of the CDC130 is a robust 1800-watt motor that generates the sustained torque required to drive core bits through the hardest substrates. The fully variable speed dial — ranging from 0 to 1200 revolutions per minute — gives the operator complete control, allowing slower speeds for large-diameter bits and higher speeds for smaller bores, ensuring clean cuts and extended bit life across all applications.
  • Maximum 130mm Drilling Diameter for Large-Bore Precision: The CDC130 is rated for a maximum core drilling diameter of 130mm, making it capable of producing the large, clean-edged holes required for pipe sleeves, conduit bundles, and structural anchors. Unlike conventional rotary hammers that chip and fracture surrounding material, the core drilling action removes a solid cylindrical plug, leaving a smooth, precise bore that requires no secondary finishing work.
  • Double Insulation for Maximum Operator Safety: The machine is engineered with a double insulation system, a critical safety architecture in which all live electrical components are completely separated from the outer housing by a secondary non-conductive barrier. This design means that even in the event of an internal wiring fault, the operator cannot receive an electric shock through the tool body — a vital protection feature when working in wet or damp environments such as basements, drainage channels, or outdoor construction sites.
  • 220–240V / 50-60Hz Universal AC Compatibility with Type G Plug: Rated at 220-240 volts and compatible with both 50Hz and 60Hz power grids, the CDC130 is fully suited to the standard electrical infrastructure of the UAE, GCC, and all countries using the Type G British 3-Pin plug standard. No adapters or voltage converters are required — simply plug in and operate, whether on a residential site, commercial project, or industrial facility.
  • CE-Certified Construction & Metallic Carrying Case for Professional Use: The CDC130 carries CE certification, confirming that it has been independently tested and verified to meet the rigorous safety, health, and environmental protection standards of European conformity directives — a benchmark widely recognised by procurement teams and site safety officers across the region. The machine is delivered complete with a guide book for operational reference and housed in a heavy-duty metallic carrying case that shields the drill from impact, dust, and moisture during transport between sites, extending the service life of the tool and ensuring all components arrive intact and ready for use.
Key Features Perfect For
  • 1800W Heavy-Duty Motor — Delivers consistent, high-torque power for demanding core drilling tasks without overheating.
  • Up to 130mm Drilling Diameter — Handles large-bore holes in a single pass through concrete, masonry, and stone.
  • Variable Speed Control (0–1200 r/min) — Allows precise speed adjustment to match the material and bit size for optimal results.
  • Double Insulation Safety Design — Electrical components are fully isolated from the outer casing, eliminating shock risk.
  • Metallic Carrying Case Included — Rugged metal case protects the machine during transport and keeps components organised on site.
  • Construction & Civil Works — Creating anchor bolt holes and structural penetrations in reinforced concrete slabs and walls.
  • Plumbing Installations — Drilling precise passages for water supply pipes and drainage lines through concrete floors and walls.
  • Electrical & Conduit Work — Forming clean conduit runs and cable entry points in masonry and block walls.
  • HVAC & Mechanical Services — Cutting core holes for ductwork, ventilation pipes, and mechanical service penetrations.

General Purchase & Comparison Queries

What makes the ID CDC130 different from a standard rotary hammer drill?

A standard rotary hammer uses a percussive hammering action combined with rotation to chip through concrete, which often results in rough, irregular holes and significant cracking of surrounding material. The ID CDC130 is a dedicated core drill machine that uses a rotating cylindrical bit to cut a clean, precise bore by removing a solid core plug. This produces smooth, accurate holes up to 110mm in diameter with no damage to the surrounding substrate — a critical requirement for professional plumbing, electrical, and HVAC installations where hole integrity and finish quality matter.

Is the ID CDC130 suitable for use in the UAE and GCC countries?

Yes, absolutely. The CDC130 is rated at 220–240V / 50–60Hz and is supplied with a Type G British 3-Pin plug, which is the standard plug type used throughout the UAE, Qatar, Bahrain, Kuwait, and other GCC countries. No voltage converter or plug adapter is required. Simply connect to any standard wall socket and the machine is ready to operate at full rated power.

Does the CDC130 come with a warranty or quality certification?

The ID CDC130 carries CE certification, which means it has been independently tested and confirmed to comply with European safety, electromagnetic compatibility, and environmental standards — a widely recognised quality benchmark. For specific warranty terms and after-sales support available in your region, please contact the Ideal Power Tools team directly through the store's contact page.

Product-Specific and Usage Queries

What is the maximum hole size the CDC130 can drill, and in which materials?

The CDC130 supports a maximum core drilling diameter of 110mm. It is designed for use in hard construction materials including concrete, reinforced concrete, asphalt, natural stone, and masonry block. The variable speed control (0–2000 r/min) allows the operator to select the appropriate speed for the material and bit diameter being used, ensuring clean cuts and optimal bit performance across all supported substrates.

Can the CDC130 be used for wet core drilling?

The CDC130 is engineered with a double insulation safety system that isolates all live electrical components from the outer casing, providing a critical layer of protection in environments where moisture may be present. While the double insulation significantly enhances safety, operators should always follow standard site safety protocols when working near water. For wet core drilling applications, ensure the work area is properly managed and consult the included guide book for operational recommendations specific to your application.

What is included in the box when I purchase the CDC130?

The CDC130 package includes the core drill machine itself and a guide book for operational reference, all housed securely inside a heavy-duty metallic carrying case. The metal case is designed to protect the machine from impact, dust, and moisture during transport and storage on site. Core drill bits are sold separately and should be selected based on the required hole diameter and material type.

Problem/Solution-Oriented Queries

The drill is not reaching full speed — what should I check?

If the CDC130 is not reaching its rated no-load speed of 2000 r/min, first verify that the variable speed dial is set to the maximum position. Next, confirm that the power supply is delivering a stable 220–240V output — low voltage from an undersized generator or a long extension cable can significantly reduce motor performance. Also check that the core bit is correctly seated and that the bit is not worn or clogged with debris, as excessive resistance from a damaged bit will reduce effective speed under load.

How do I prevent the drill from overheating during extended use?

The CDC130's 1800W heavy-duty motor is built for sustained operation, but best practice on any core drill is to allow the machine to rest periodically during extended drilling sessions, particularly when working through thick or heavily reinforced concrete. Use the variable speed control to match the speed to the material — running at unnecessarily high speeds in hard material increases heat generation. Ensure the ventilation slots on the motor housing are kept clear of dust and debris, and always use sharp, correctly sized core bits to minimise the load on the motor.

The drill is producing rough or uneven holes — how can I improve cut quality?

Rough or uneven core holes are most commonly caused by incorrect speed selection, a worn core bit, or excessive lateral pressure during drilling. Use the variable speed dial to reduce the speed when drilling with larger diameter bits or in harder materials — slower speeds allow the bit segments to cut cleanly rather than skipping across the surface. Ensure the machine is held firmly and perpendicular to the work surface throughout the cut. If the bit is worn or the diamond segments are glazed, the bit should be replaced or re-sharpened before continuing.