ID ANF50 PNEUMATIC TACKER & NAILER MACHINE [AIR TOOL] - 27614

The ID ANF50 is a pneumatic tacker and nailer powered by compressed air, unlike electric staple guns that rely on a battery or mains power. Pneumatic tools like the ANF50 deliver higher consistent driving force, faster cycle rates, and greater durability for professional and high-volume use. The ANF50 operates at 70–100 psi and can hold up to 100 fasteners in its magazine, making it significantly more productive than most electric alternatives for trade applications.

The ANF50 requires a compressed air supply delivering 70–100 psi (4.8–7.5 bar) at the tool inlet. Most standard workshop or portable compressors with a tank capacity of 24 litres or more will comfortably run this tool. The machine has a maximum pressure rating of 120 psi (8.3 bar), so ensure your compressor's regulator is set within the operating range to avoid over-pressurisation and maintain consistent fastener depth.

The ANF50 is built for both professional trade and serious DIY applications. Its CE Machine Test certification confirms it meets international safety and performance standards required for professional environments. The high-capacity 100-nail magazine, robust pneumatic construction, and wide pressure range make it well-suited for upholstery workshops, carpentry businesses, furniture manufacturers, and automotive interior fitters who need a reliable, fast-cycling fastening tool.

The ANF50 is designed to fasten a wide range of materials including wood, MDF, plywood, hardboard, soft plastics, foam-backed fabrics, and drywall. It is commonly used for attaching upholstery fabric to furniture frames, securing insulation panels, installing trim and molding, and fixing cabinet backs. The adjustable operating pressure allows you to dial in the correct driving depth for softer or harder substrates, preventing over-penetration or surface damage.

The ANF50 comes as a complete ready-to-use kit. In the box you will find the ANF50 pneumatic tacker/nailer machine, a printed user guide book for setup and operating instructions, a pair of protective safety glasses for eye protection during use, a lubricating oil bottle to maintain the pneumatic motor, and a wrench for maintenance and fastener jam clearing. No additional accessories are required to get started — simply connect to your air supply and begin work.

The ANF50 features a 100-piece nail/staple loading capacity per magazine fill. This high-capacity magazine is one of the key productivity advantages of the ANF50, allowing extended work sessions without frequent reloading. For high-volume tasks such as upholstering large furniture pieces or running long lengths of trim, the generous magazine capacity keeps interruptions to a minimum and maintains a consistent working rhythm.

Incorrect fastener depth is almost always related to air pressure settings. First, check that your compressor regulator is set within the recommended operating range of 70–100 psi (4.8–7.5 bar). If nails are not fully driven, increase pressure incrementally towards 100 psi. If nails are over-driven or the surface is being damaged, reduce pressure towards 70 psi. Also ensure the pneumatic motor is properly lubricated using the included oil bottle — a drop of pneumatic tool oil into the air inlet before each use session maintains consistent driving power and extends tool life.

To clear a nail jam safely: first disconnect the air supply from the tool inlet before attempting any jam clearing. Use the included wrench to access the driver nose or magazine release mechanism as described in the user guide book. Remove any bent or misaligned fasteners carefully, inspect the driver blade for damage, and reload the magazine with correctly sized nails before reconnecting the air supply. Never attempt to clear a jam while the tool is still connected to compressed air, as this presents a serious safety risk.

Air leaks in pneumatic tools are typically caused by worn O-rings, a loose air inlet fitting, or insufficient lubrication. Start by checking that the air hose connector is fully seated and the fitting is tight. Apply a drop of pneumatic tool oil (included) into the air inlet and cycle the tool a few times — this often resolves minor internal seal leaks by re-lubricating the O-rings. If the leak persists, refer to the included user guide for O-ring inspection guidance. Operating the tool consistently within the recommended 70–100 psi range and lubricating before each session will prevent most seal wear issues over time.