ID ACB40-1 BELT DRIVEN [1 HP] ELECTRIC AIR COMPRESSOR MACHINE [G-240V] - 27813

Yes. This compressor is rated at 220–240V / 50Hz, which is the standard mains electricity specification across the UAE, Saudi Arabia, and the wider GCC region. It also comes fitted with a Type G (British 3-Pin) plug, which is the standard plug type used in the UAE, making it immediately compatible with local wall sockets without any adaptor.

This compressor is built with a 1 HP motor engineered for extended operational cycles, a robust 40-litre steel tank, and a double insulation electrical system that protects internal components from moisture and mechanical stress. The 1150 RPM no-load speed is deliberately lower than budget compressors, which reduces heat build-up and mechanical wear — key factors that determine long-term durability in professional environments.

The unit ships as a complete package. In the box you will find the compressor machine itself, a user guide, two air intake filters, and four wheels pre-fitted for mobility. You will need to source your own pneumatic hose and tool attachments (such as a tyre inflator chuck or spray gun connector) separately, as these are application-specific accessories.

With a maximum working pressure of 8 bar and an airflow of 40 L/min, this compressor is well-suited for tools including tyre inflators, brad nailers, staple guns, air blow guns, small spray paint guns, and air ratchets. For high-consumption tools like large impact wrenches or sandblasters that require sustained high CFM, it is advisable to check the tool's minimum air consumption requirements against the 40 L/min output.

Double insulation means the motor's live electrical components are encased in two separate layers of insulating material, ensuring they can never make contact with the outer metal body of the machine. This eliminates the need for an earth wire connection and means that even if the primary insulation were to fail, the secondary layer prevents any risk of electric shock to the operator. This is a critical safety feature for workshop environments where the machine may be exposed to dust, oil mist, or moisture.

Yes. The unit comes supplied with four wheels included in the box, allowing you to roll the compressor freely across workshop floors, garage spaces, or job sites. This makes repositioning straightforward without requiring you to lift the full weight of the machine and its 40-litre tank.

Overheating in compressors is typically caused by a motor running at excessively high RPM or a tank that is too small, forcing the motor to cycle on and off constantly. This unit addresses both issues: the 1150 RPM no-load speed keeps the motor running cool, and the 40-litre tank stores enough air to reduce how frequently the motor needs to restart. The heavy-duty motor construction is specifically engineered to sustain longer operational periods without thermal degradation.

This compressor has been designed with safety as a priority. The double insulation system ensures complete electrical isolation between the motor's live components and the outer casing, protecting against electric shock. Additionally, the unit carries a CE (Machine Test) certification, confirming it has been independently tested and verified to meet European safety, health, and environmental protection standards — giving you confidence in its safe operation in professional workshop conditions.

Pressure drop during use is usually caused by an undersized tank or insufficient airflow output. This compressor's 40-litre tank acts as a substantial air reservoir, maintaining pressure for longer between motor cycles. The 40 L/min airflow rate continuously replenishes the tank during operation, and the 8-bar maximum pressure provides a wide working pressure range, ensuring your tools receive consistent, stable air pressure throughout the task.