ID 990P PNEUMATIC SPRAY GUN MACHINE [AIR TOOL] - 23309
Chat with us
Choose options
Professional HVLP Spray Performance — Precision Atomization for Every Coating Job
The ID 990P Pneumatic Spray Gun Machine is a professional-grade HVLP air spray gun engineered for delivering flawless, atomized finishes on a wide range of surfaces. Powered by compressed air and equipped with a 1-pint capacity cup, this pneumatic paint sprayer offers precise control over spray pattern, fluid flow, and air pressure, making it the go-to air tool for automotive refinishing, furniture coating, and general-purpose surface painting.
| Key Features | Perfect For |
|---|---|
|
|
- HVLP (High Volume Low Pressure) spray system with a 1-pint fluid cup delivers a consistent, high-transfer coating with minimal bounce-back, reducing material waste and keeping your workspace cleaner during automotive and furniture finishing tasks.
- Fully adjustable spray pattern controls — including fan width, fluid output, and air pressure knobs — allow the operator to dial in the exact finish required, whether applying a fine detail coat on trim or a broad base coat across large body panels.
- Precision-machined nozzle atomizes paint, lacquer, varnish, and other coatings into ultra-fine particles, ensuring a smooth, drip-free surface finish that minimizes the need for sanding or rework after application.
- Pneumatic air-powered motor provides consistent, high-torque performance without the heat buildup associated with electric sprayers — ideal for extended spraying sessions in automotive workshops, manufacturing facilities, and construction environments.
- Lightweight ergonomic body with a balanced grip reduces hand and wrist fatigue during prolonged use, while the standard air inlet connects easily to most workshop compressors for immediate, tool-ready operation.
- The package includes the spray gun machine, a precision nozzle, a cleaning brush, an inline filter, a tool wrench, and a guide book — everything needed to set up, operate, and maintain the gun right out of the box, with no additional accessories required for initial use.
General Purchase & Comparison Queries
What makes the ID 990P different from a standard spray gun?
The ID 990P uses HVLP (High Volume Low Pressure) technology, which delivers more paint to the surface with less overspray compared to conventional high-pressure spray guns. This means better material efficiency, a cleaner finish, and less mess — making it a superior choice for both professional workshops and serious DIY users.
Is the ID 990P suitable for both professional and home use?
Yes. The ID 990P Pneumatic Spray Gun is designed to perform in professional automotive and manufacturing environments, but its lightweight ergonomic body and straightforward controls also make it accessible for skilled home users and DIY enthusiasts tackling furniture refinishing, wall coating, or small metalwork projects.
What air compressor do I need to run this spray gun?
The ID 990P connects to a standard workshop air compressor via its standard air inlet fitting. For optimal HVLP performance, a compressor capable of delivering adequate CFM (cubic feet per minute) at the recommended PSI for your coating material is advised. Refer to the included guide book for the exact pressure settings suited to different paint viscosities.
Product-Specific and Usage Queries
What types of coatings can I spray with the ID 990P?
The ID 990P is compatible with a wide range of fluid coatings including automotive paints, lacquers, varnishes, primers, and stains. The adjustable fluid control knob allows you to fine-tune the flow rate to match the viscosity of your chosen material, ensuring consistent atomization and a smooth finish across different coating types.
How do I adjust the spray pattern on the ID 990P?
The gun features three adjustment knobs: one for fan width (horizontal or vertical pattern), one for fluid output volume, and one for air pressure. By combining these controls, you can switch between a narrow round pattern for detail work and a wide fan pattern for covering large surfaces quickly. The included guide book provides step-by-step setup instructions.
What is included in the box with the ID 990P?
The ID 990P ships as a complete, ready-to-use kit. Inside the box you will find the spray gun machine, a precision nozzle, a cleaning brush, an inline filter, a tool wrench, and a guide book — providing everything required for immediate setup and ongoing maintenance without needing to source additional accessories separately.
Problem/Solution-Oriented Queries
Why is my spray pattern uneven or spitting paint?
Uneven spray or spitting is most commonly caused by paint that is too thick, a partially blocked nozzle, or insufficient air pressure. Start by thinning your coating material to the correct viscosity, then clean the nozzle using the included brush and tool wrench. Check that your compressor is delivering consistent pressure and that the inline filter is clean and free of moisture or debris.
How do I clean the ID 990P after use?
After each use, empty the 1-pint cup and flush the gun with an appropriate solvent for your coating type (water for water-based paints, mineral spirits for oil-based). Use the included cleaning brush to scrub the nozzle and fluid passages, and use the tool wrench to disassemble the nozzle for a thorough clean. Regular cleaning prevents paint buildup and extends the service life of the gun.
The gun is leaking air from the trigger area — what should I do?
Air leaks around the trigger are typically caused by worn needle packing or a loose air valve. First, use the included tool wrench to check and gently tighten the needle packing nut. If the leak persists, inspect the air valve seal for wear. For replacement parts or further technical support, contact the Ideal Power Tools service team to ensure the gun is restored to full operating condition.
Machine (1 Pcs), Guide Book (1 Pcs), Nozzle (1 Pcs), Brush (1 Pcs), Filter (1 Pcs), Tool Wrench (1 Pcs)