ID 850RF ELECTRIC IMPACT DRILL MACHINE [G-240V] - 26695
ID 850RF ELECTRIC IMPACT DRILL MACHINE [G-240V] - 26695
ID 850RF ELECTRIC IMPACT DRILL MACHINE [G-240V] - 26695
ID 850RF ELECTRIC IMPACT DRILL MACHINE [G-240V] - 26695
ID 850RF ELECTRIC IMPACT DRILL MACHINE [G-240V] - 26695

ID 850RF ELECTRIC IMPACT DRILL MACHINE [G-240V] - 26695

Dhs. 70.00 Dhs. 100.00
SKU: 26695
Quantity:
Fallback Image Fallback Image Fallback Image
BUY ON AMAZON!
Only 5 units left
Chat with us

The ID 850RF Electric Impact Drill Machine is an 850W heavy-duty corded impact drill engineered for professionals and serious DIYers who demand precision, power, and durability. Featuring dual-mode drilling, a variable-speed trigger, and a 0–44800 BPM impact frequency, this machine tackles wood, steel, masonry, and concrete with equal confidence. Supplied with a Type G (British 3-Pin) plug, it is ready for UAE and UK mains voltage (220–240V).

Key Features Perfect For
  • 850W Heavy-Duty Motor — sustained power for demanding applications
  • Dual-Mode Operation — slide switch between standard drill and impact/hammer mode
  • Variable Speed Trigger — 0–2800 RPM with progressive finger control
  • Forward & Reverse Control — effortless screw driving and bit extraction
  • 360° Rotatable Auxiliary Handle — full two-handed control and superior stabilization
  • Drilling into concrete, brick, and masonry on construction sites
  • Woodworking — holes up to 18mm with clean, accurate results
  • Steel fabrication and metalwork up to 13mm
  • Professional electrical and plumbing installations
  • Heavy-duty DIY renovation and fit-out projects

Professional-Grade Impact Drilling Power — Built to Outlast the Job

  • 850W Rated Power Input with 0–2800 RPM Variable Speed: The high-output motor delivers consistent torque across the full speed range. The variable speed trigger gives you fingertip control, squeeze gently for slow, precise starts in tile or glass, and press fully for maximum RPM when boring through timber or steel. The 1/2" spindle thread and 1.5–13mm keyed chuck accept a wide range of standard drill bits and driver accessories.
  • Impact Hammer Mode at up to 44800 BPM: A single slide switch activates the percussion mechanism, delivering up to 44800 blows per minute alongside the rotary action. This rapid hammering action fractures masonry and concrete as the bit rotates, enabling clean, fast holes up to 13mm in brick, block, and concrete without the need for a dedicated SDS drill on lighter masonry tasks.
  • Dual-Mode Functionality — Standard Drill and Hammer Drill in One Tool: Switch seamlessly between pure rotary mode for wood (up to 18mm) and steel (up to 13mm), and hammer/impact mode for masonry (up to 13mm). This eliminates the need to carry two separate machines on-site, reducing tool clutter and cost without compromising performance in either mode.
  • Double Insulation and CE-Certified Safety Construction: The tool is built with full double insulation, ensuring that live electrical components are completely isolated from the outer housing. There is no path for electrical current to reach the user even in the event of an internal fault. The machine carries CE certification (Machine Test), confirming compliance with European safety, health, and environmental protection standards.
  • Ergonomic Lightweight Design at Just 1.54 kg: Weighing only 1.54 kg, the ID 850RF is significantly lighter than comparable impact drills, reducing arm fatigue during extended overhead or repetitive drilling tasks. The rubberized grip absorbs vibration, while the compact, balanced body allows access to confined spaces. The fully 360° rotatable auxiliary side handle can be positioned at any angle for maximum leverage and two-handed stability on heavy cuts.
  • Auto-Stop Carbon Brush System for Extended Motor Life: The included auto-stop carbon set automatically cuts power to the motor when the carbon brushes reach the end of their service life, preventing damage to the armature and commutator. This protects the motor from costly wear and extends the overall service life of the tool, a feature typically found on professional-grade machines.
  • Complete Ready-to-Use Kit — Depth Gauge, Chuck Key, and Auxiliary Handle Included: The ID 850RF ships as a complete working package. The depth gauge clips to the auxiliary handle for repeatable, consistent hole depths. The chuck key provides secure bit clamping in the 1.5–13mm keyed chuck. The auxiliary handle and auto-stop carbon set (1 pair) are included alongside a printed guide book, so the tool is ready for immediate professional use straight from the box.

 

General Purchase & Comparison Queries

Is the ID 850RF suitable for both home DIY and professional trade use?

Yes. The ID 850RF is engineered to bridge the gap between consumer and professional tools. Its 850W motor, double insulation, CE certification, and auto-stop carbon brush system are features associated with professional-grade machines, while its 1.54 kg lightweight body and compact design make it equally practical for home renovation and DIY projects. It handles wood, steel, and masonry — covering the full range of tasks a tradesperson or serious DIYer encounters daily.

Does this drill work in the UAE and the UK? What plug type does it use?

Yes. The ID 850RF operates on 220–240V at 50/60Hz, which is compatible with both UAE and UK mains power. It is supplied with a Type G (British 3-Pin) plug, which is the standard plug type used in the UAE, UK, and many GCC countries. No adapter is required for use in these markets.

What accessories and components are included in the box?

The ID 850RF ships as a complete, ready-to-use kit. Included in the box are the drill machine (1 unit), a printed guide book, an auto-stop carbon set (1 pair) for extended motor protection, a 360° rotatable auxiliary handle for two-handed control, a chuck key for secure bit clamping, and a depth gauge for consistent, repeatable hole depths. No additional accessories are required to begin drilling immediately.

Product-Specific and Usage Queries

What is the maximum drilling capacity in concrete, wood, and steel?

The ID 850RF offers the following maximum drilling capacities: 13mm in masonry/concrete (hammer mode), 18mm in wood (standard rotary mode), and 13mm in steel (standard rotary mode). The 1.5–13mm keyed chuck accommodates standard round-shank drill bits across all three material types. For masonry holes larger than 13mm, an SDS rotary hammer would be recommended.

How do I switch between standard drilling and hammer/impact mode?

Switching modes is straightforward. A dedicated slide switch on the body of the drill toggles between standard rotary mode (for wood and metal) and hammer/impact mode (for masonry, brick, and concrete). Always ensure the drill is stationary and the bit is not under load before switching modes. In hammer mode, the machine delivers up to 44800 impacts per minute (BPM) alongside the rotary action, providing the percussion force needed to penetrate hard masonry surfaces efficiently.

Can I use the ID 850RF for driving screws as well as drilling?

Yes. The forward and reverse control allows you to switch the direction of rotation, making the ID 850RF suitable for both driving screws and extracting them. The variable speed trigger (0–2800 RPM) gives you the slow-start control needed for accurate screw placement without cam-out or surface damage. Use standard rotary mode (not hammer mode) for all screw-driving tasks. A screwdriver bit can be fitted directly into the 1.5–13mm keyed chuck.

Problem/Solution-Oriented Queries

The drill is not making progress in concrete — what should I check?

First, confirm that the hammer/impact mode is engaged using the slide switch — standard rotary mode alone will not effectively penetrate concrete or masonry. Second, ensure you are using a carbide-tipped masonry drill bit of the correct diameter (up to 13mm). Third, apply firm, steady forward pressure without forcing the drill — let the 44,800 BPM impact frequency do the work. If the bit is worn or blunt, replace it. For holes larger than 13mm in concrete, an SDS rotary hammer drill is recommended.

My drill has stopped working — could it be the carbon brushes?

Yes, this is a common cause of sudden power loss in corded drills. The ID 850RF is equipped with an auto-stop carbon brush system — when the carbon brushes wear down to their minimum safe length, the system automatically cuts power to protect the motor armature from damage. The included auto-stop carbon set (1 pair) can be used to replace the brushes and restore full operation. Carbon brush replacement is a straightforward maintenance task and significantly extends the working life of the motor.

The drill feels difficult to control during heavy drilling — how can I improve stability?

Attach the included 360° rotatable auxiliary side handle to the front of the drill body. This handle can be positioned at any angle to suit your grip and working position, providing a firm two-handed hold that significantly reduces torque reaction and vibration transfer to your hands and wrists. For overhead or awkward-angle drilling, rotate the handle to the most comfortable position before starting. The rubberised main grip and balanced 1.54 kg body further reduce fatigue during extended use.