ID GC135 [WITH 7 BLADES] [5.5"] ELECTRIC GROOVE CUTTERS AND WALL CHASER MACHINE [G-240V] - 26224
ID GC135 [WITH 7 BLADES] [5.5"] ELECTRIC GROOVE CUTTERS AND WALL CHASER MACHINE [G-240V] - 26224

ID GC135 [WITH 7 BLADES] [5.5"] ELECTRIC GROOVE CUTTERS AND WALL CHASER MACHINE [G-240V] - 26224

Dhs. 480.00 Dhs. 600.00
SKU: 26224
Quantity:
Fallback Image Fallback Image Fallback Image Fallback Image
BUY ON AMAZON!
Only 5 units left
Chat with us

Cut Deeper, Work Smarter — Professional Wall Chasing at 3000W

The ID GC135 Electric Groove Cutter and Wall Chaser Machine is a professional-grade 3000W wall chasing tool engineered for precision channel cutting in concrete, brick, and masonry surfaces. Equipped with a 135mm maximum blade diameter, a 5000 RPM no-load speed, and a comprehensive 7-blade configuration, this machine delivers clean, accurate grooves for electrical conduit, plumbing pipes, and structural joints. Powered at 220–240V / 50–60Hz and fitted with a Type G British 3-Pin plug, it is purpose-built for construction professionals and contractors operating in the UAE and GCC markets.

Key Features Perfect For
  • 3000W Rated Power Input for heavy-duty continuous cutting in hard masonry and concrete
  • 5000 RPM No-Load Speed delivering fast, clean groove cuts with minimal effort
  • 135mm Maximum Blade Diameter supporting deep channel cuts for pipes and conduit
  • 7-Blade Configuration enabling multi-groove cutting in a single pass for efficiency
  • Integrated Water Cooling System with water pump and pipe to reduce dust and extend blade life
  • Cutting channels for electrical wiring and conduit installation in walls and floors
  • Plumbing pipe routing in concrete and brick structures
  • Construction and renovation projects requiring precise groove depth control
  • Creating expansion joints in masonry and tiled surfaces
  • Professional contractors working on residential and commercial fit-out projects
  • High-Output 3000W Motor: The ID GC135 is powered by a robust 3000-watt motor rated at 220–240V / 50–60Hz, delivering consistent torque and sustained cutting power through the hardest concrete, brick, and block surfaces without overheating or power drop during extended use.
  • 5000 RPM No-Load Speed with 135mm Blade Capacity: Operating at a no-load speed of 5000 RPM and accepting blades up to 135mm in diameter, this wall chaser achieves precise, smooth groove profiles at depth — ideal for channels that require clean edges for pipe or cable seating without chipping or cracking surrounding material.
  • 7-Blade Multi-Groove Cutting System: The machine ships with a 7-blade assembly that allows simultaneous multi-groove cutting in a single pass, dramatically reducing labour time on large-scale electrical or plumbing installations. Each blade is positioned for uniform spacing, ensuring consistent channel width across the full cut depth.
  • Integrated Water Cooling and Dust Suppression: Equipped with a built-in water pump, water pipe, and faucet, the GC135 continuously feeds water to the blade during operation. This wet-cutting system suppresses silica dust — a critical safety feature on enclosed construction sites — while simultaneously cooling the blade to extend its service life and maintain cutting accuracy over long sessions.
  • Type G British 3-Pin Plug — UAE and GCC Ready: The machine is supplied with a Type G plug (British 3-Pin) and operates on the standard 220–240V grid used across the UAE, Saudi Arabia, and wider GCC markets, eliminating the need for adapters or voltage converters on site.
  • Comprehensive Accessory Kit for Immediate Deployment: The GC135 is delivered as a complete working package. Included in the box are the machine unit, a guide book, two gaskets, a faucet, an open-end wrench, a 13–19 sleeve, an eight-size large Allen wrench, a water pump, a water pipe, and seven blades — everything required to begin cutting straight out of the box with no additional purchases needed.

The ID GC135 is designed and manufactured to meet international electrical safety and performance standards applicable to professional power tools in the 220–240V category. The complete package includes the main machine unit, a printed guide book, two sealing gaskets, a faucet assembly, an open-end wrench, a 13–19mm sleeve, an eight-size large Allen wrench, a water pump, a water pipe, and seven cutting blades — providing a fully equipped, ready-to-use wall chasing solution for professional and trade use.

 

General Purchase & Comparison Queries

Is the ID GC135 compatible with UAE power outlets?

Yes. The ID GC135 is fully compatible with UAE power infrastructure. It operates on 220–240V / 50–60Hz and is supplied with a Type G British 3-Pin plug — the standard plug type used across the UAE, Saudi Arabia, and the wider GCC region. No adapter or voltage converter is required.

How does the ID GC135 compare to a standard angle grinder for wall chasing?

Unlike a standard angle grinder, the ID GC135 is a dedicated wall chaser engineered specifically for groove cutting. It features a 7-blade configuration that cuts multiple parallel grooves in a single pass, an integrated water cooling system for dust suppression, and adjustable depth control — capabilities that a general-purpose angle grinder cannot replicate. For professional groove cutting in concrete or brick, the GC135 delivers significantly greater precision, speed, and safety.

Does this machine come with blades included, or do I need to purchase them separately?

The ID GC135 ships as a complete ready-to-use kit. It includes seven cutting blades along with all necessary accessories — water pump, water pipe, faucet, wrenches, gaskets, and a sleeve — so you can begin cutting immediately upon delivery without any additional purchases.

Product-Specific and Usage Queries

What is the maximum cutting depth achievable with the ID GC135?

The ID GC135 accepts blades up to 135mm in maximum diameter. The usable cutting depth is determined by the blade diameter and the depth adjustment setting on the machine. For precise depth requirements on your specific project, refer to the included guide book or consult the blade manufacturer's specifications for the blades supplied.

Why does the machine use a water pump, and is it mandatory during operation?

The integrated water pump and water pipe serve two critical functions: they suppress silica dust generated during cutting — a serious respiratory hazard on construction sites — and they cool the cutting blades to prevent overheating and premature wear. While the machine can physically operate without water, wet cutting is strongly recommended for operator safety, blade longevity, and compliance with site health and safety requirements.

Can the ID GC135 cut grooves in both walls and floors?

Yes. The ID GC135 is designed for groove cutting in both vertical wall surfaces and horizontal floor surfaces. Its 5000 RPM speed and 3000W motor provide sufficient power and control for cutting channels in concrete, brick, block, and similar masonry materials in any orientation, making it suitable for electrical conduit, plumbing pipe routing, and expansion joint work across a full construction project.

Problem/Solution-Oriented Queries

The machine is generating excessive dust during cutting — what should I do?

Excessive dust during operation is typically caused by the water cooling system not being active or properly connected. Ensure the water pump is switched on, the water pipe is securely attached to the faucet, and there is an adequate water supply feeding the system. The GC135's wet-cutting design is specifically engineered to suppress dust at the source — operating it dry will produce significant dust and will also reduce blade life and cutting performance.

The blades are wearing out faster than expected — what could be causing this?

Premature blade wear is most commonly caused by cutting without water cooling, applying excessive downward pressure, or cutting materials significantly harder than the blade rating. Ensure the water pump is running continuously during operation to keep blades cool. Allow the machine's 5000 RPM speed to do the work — forcing the blade through material increases friction and heat. For very hard aggregate concrete, verify that the supplied blades are rated for that material hardness.

The machine is not cutting to a consistent depth — how can I fix this?

Inconsistent cutting depth is usually caused by incorrect depth guide adjustment or the guide plate not making full contact with the surface being cut. Check that the depth adjustment is locked securely before beginning a cut, and ensure the machine's base plate is flat against the wall or floor surface throughout the pass. Refer to the included guide book for the correct depth-setting procedure specific to the GC135. If the issue persists, inspect the gaskets for wear, as damaged gaskets can affect the stability of the depth guide assembly.