{"product_id":"id-hd2-26sre-110v-electric-rotary-hammer-drill-machine-g-110v-29818","title":"ID HD2-26SRE [110V] [800W] ELECTRIC ROTARY HAMMER DRILL MACHINE [G-110V] - 29818","description":"\u003ch2\u003e800W Professional Impact Power Built for the Toughest Site Conditions\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eIDEAL ID HD2-26SRE Electric Rotary Hammer Drill\u003c\/strong\u003e is a professional-grade \u003cstrong\u003e800W SDS-Plus hammer drill machine\u003c\/strong\u003e engineered for demanding drilling and light demolition tasks across \u003cstrong\u003econcrete, brick, stone, wood, and steel\u003c\/strong\u003e. Operating on \u003cstrong\u003e110V with a Type G British 3-Pin plug\u003c\/strong\u003e, it delivers a powerful \u003cstrong\u003e3 Joule impact energy\u003c\/strong\u003e at up to \u003cstrong\u003e4,900 impacts per minute\u003c\/strong\u003e, making it the go-to tool for construction professionals, site contractors, and masonry specialists. With a net weight of just \u003cstrong\u003e3kg\u003c\/strong\u003e, it combines serious performance with manageable handling across all-day use on site.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eKey FeaturesPerfect For\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSDS-Plus Shank System\u003c\/strong\u003e — 10mm SDS-Plus chuck for fast, tool-free bit changes and secure bit retention under impact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVariable Speed Trigger\u003c\/strong\u003e — Proportional speed control from 0–1,100 RPM for precision across different materials\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward \u0026amp; Reverse Control\u003c\/strong\u003e — Bidirectional rotation for drilling and controlled extraction of stuck bits\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDouble Insulation\u003c\/strong\u003e — Electrical components fully isolated from the outer casing for enhanced operator safety\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVC Carrying Case Included\u003c\/strong\u003e — Rugged protective case for secure transport, storage, and site organization\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConcrete and masonry drilling\u003c\/strong\u003e on construction and civil engineering sites\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAnchor bolt and fixing installation\u003c\/strong\u003e in concrete walls, columns, and slabs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLight demolition and chiselling\u003c\/strong\u003e with the included pointed and flat chisels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSteel and timber drilling\u003c\/strong\u003e across multi-trade site applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110V site environments\u003c\/strong\u003e requiring a Type G plug-compatible power tool\u003c\/li\u003e\n\u003c\/ul\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e26mm Maximum Concrete Drilling Capacity with 3J Impact Energy:\u003c\/strong\u003e The HD2-26SE delivers a \u003cstrong\u003e3 Joule impact energy stroke\u003c\/strong\u003e at up to \u003cstrong\u003e4,900 blows per minute (bpm)\u003c\/strong\u003e, enabling it to drill holes up to \u003cstrong\u003e26mm diameter in concrete\u003c\/strong\u003e with efficiency that rivals heavier, more expensive machines. The \u003cstrong\u003eoptimum drilling range of 6–18mm\u003c\/strong\u003e covers the vast majority of anchor and fixing applications encountered on construction sites, making this the ideal single-tool solution for site fixings work.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e800W Rated Motor with Variable Speed from 0–1,100 RPM:\u003c\/strong\u003e The \u003cstrong\u003e800W rated power input\u003c\/strong\u003e drives a robust motor capable of sustaining high torque output under continuous load. The \u003cstrong\u003evariable speed trigger\u003c\/strong\u003e allows the operator to modulate spindle speed from zero to a full \u003cstrong\u003e1,100 revolutions per minute, \u003c\/strong\u003eslower speeds for starting holes cleanly and preventing bit walk, and higher speeds for fast material removal. This level of control is critical when working with brittle tiles, aged masonry, or precision anchor placements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSDS-Plus Chuck with 10mm Shank for Rapid Bit Changes:\u003c\/strong\u003e The \u003cstrong\u003eSDS-Plus (Slotted Drive System) chuck\u003c\/strong\u003e accepts all standard SDS-Plus shank bits and chisels, which lock into the chuck with a simple push-and-click action, no chuck key required. The SDS-Plus system also allows the bit to slide axially within the chuck during hammering, which decouples the impact mechanism from the operator's hands and significantly reduces vibration transmission. The machine ships with a complete \u003cstrong\u003edrill bit set (6mm, 8mm, 10mm)\u003c\/strong\u003e, a \u003cstrong\u003epointed chisel\u003c\/strong\u003e, and a \u003cstrong\u003eflat chisel\u003c\/strong\u003e, covering the most common site drilling and chiselling tasks straight out of the case.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward\/Reverse Rotation and Double Insulation Safety Design:\u003c\/strong\u003e The \u003cstrong\u003eforward and reverse control\u003c\/strong\u003e allows the operator to reverse spindle direction instantly, essential for extracting a bit that has become jammed in hard aggregate or rebar-reinforced concrete, preventing costly bit breakage and dangerous kickback. The machine's \u003cstrong\u003edouble insulation construction\u003c\/strong\u003e means the internal electrical components are separated from the outer housing by two independent layers of insulating material, eliminating the risk of electric shock from casing contact even if internal insulation degrades, a critical safety feature for wet or dusty site environments. This design also meets the requirements of \u003cstrong\u003eCE (Machine Test), GS (Geprüfte Sicherheit), and EMC (Production Inspected)\u003c\/strong\u003e certification standards, confirming compliance with European safety, mechanical integrity, and electromagnetic compatibility requirements.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e110V Type G Plug Configuration for Site Safety Compliance:\u003c\/strong\u003e Rated at \u003cstrong\u003e110V \/ 50–60Hz\u003c\/strong\u003e, this machine is specifically configured for use on \u003cstrong\u003e110V centre-tapped-to-earth (CTE) site power systems\u003c\/strong\u003e, which are the standard in the UK and many GCC construction environments for reducing electrocution risk. The \u003cstrong\u003eType G British 3-Pin plug\u003c\/strong\u003e ensures direct compatibility with 110V site transformers without the need for adaptors. The machine also ships with an \u003cstrong\u003eauto-stop carbon brush set\u003c\/strong\u003e pre-installed, which automatically interrupts the motor circuit when the brushes wear to their service limit, protecting the motor armature from damage and alerting the operator that maintenance is due.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe HD2-26SE arrives fully equipped and ready for immediate deployment. The package includes the \u003cstrong\u003edrill machine\u003c\/strong\u003e, a comprehensive \u003cstrong\u003edrill bit set (6, 8, and 10mm)\u003c\/strong\u003e, a \u003cstrong\u003epointed chisel and flat chisel\u003c\/strong\u003e for demolition work, an \u003cstrong\u003eauto-stop carbon brush set\u003c\/strong\u003e for motor protection, a pair of \u003cstrong\u003esafety gloves\u003c\/strong\u003e, a \u003cstrong\u003eguide book\u003c\/strong\u003e, and a \u003cstrong\u003erigid PVC carrying case,\u003c\/strong\u003e everything a professional needs to get on site and start working without a separate trip to the tool store.\u003c\/p\u003e\u003ch2\u003eGeneral Purchase \u0026amp; Comparison Queries\u003c\/h2\u003e\u003cp\u003eWhy choose the IDEAL HD2-26SE over a standard 240V rotary hammer?\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eHD2-26SE is rated at 110V\u003c\/strong\u003e specifically for use with \u003cstrong\u003esite transformers\u003c\/strong\u003e, which are mandatory on many UK and GCC construction sites for electrical safety compliance. A 110V centre-tapped-to-earth system limits the maximum shock voltage to 55V in the event of a fault — significantly safer than 240V tools in wet or exposed environments. If your site operates on a 110V supply, this machine plugs in directly with its \u003cstrong\u003eType G British 3-Pin plug\u003c\/strong\u003e with no adaptors needed. For workshop or domestic 240V use, a 240V variant would be more appropriate.\u003c\/p\u003e\u003cp\u003eWhat is the difference between a rotary hammer drill and a standard hammer drill?\u003c\/p\u003e\u003cp\u003eA \u003cstrong\u003estandard hammer drill\u003c\/strong\u003e uses a ratchet mechanism to create a vibrating action, which is relatively low in impact energy and suited only to light masonry work. A \u003cstrong\u003erotary hammer drill\u003c\/strong\u003e like the HD2-26SE uses a \u003cstrong\u003epneumatic piston mechanism\u003c\/strong\u003e to generate true hammering action, delivering a genuine \u003cstrong\u003e3 Joule impact energy\u003c\/strong\u003e per stroke. This makes it dramatically more effective at drilling into \u003cstrong\u003ehard concrete, reinforced masonry, and stone\u003c\/strong\u003e. The \u003cstrong\u003eSDS-Plus chuck\u003c\/strong\u003e also allows the bit to move freely during hammering, which further improves drilling efficiency and reduces operator fatigue compared to a keyed chuck hammer drill.\u003c\/p\u003e\u003cp\u003eIs this machine suitable for both drilling and demolition work?\u003c\/p\u003e\u003cp\u003eYes. The HD2-26SE supports \u003cstrong\u003erotary hammering mode\u003c\/strong\u003e for drilling into concrete, brick, and stone, as well as \u003cstrong\u003ehammer-only (chisel) mode\u003c\/strong\u003e for light demolition, tile removal, and surface preparation. The included \u003cstrong\u003epointed chisel\u003c\/strong\u003e is ideal for breaking out material and creating channels, while the \u003cstrong\u003eflat chisel\u003c\/strong\u003e is suited to tile removal and surface scaling. For heavier demolition requiring sustained chiselling over large areas, a dedicated breaker or higher-joule demolition hammer would be more appropriate — but for typical site fixing and light breaking tasks, the HD2-26SE handles both roles effectively.\u003c\/p\u003e\u003ch2\u003eProduct-Specific and Usage Queries\u003c\/h2\u003e\u003cp\u003eWhat drill bit sizes and types are compatible with this machine?\u003c\/p\u003e\u003cp\u003eThe HD2-26SE accepts all standard \u003cstrong\u003eSDS-Plus shank drill bits and chisels\u003c\/strong\u003e. The SDS-Plus system is the most widely available rotary hammer bit format globally, with bits available from 4mm up to 26mm diameter for concrete and masonry applications. The machine ships with a \u003cstrong\u003e6mm, 8mm, and 10mm SDS-Plus masonry drill bit set\u003c\/strong\u003e to cover the most common anchor and fixing hole sizes. For larger diameter holes up to the machine's \u003cstrong\u003e26mm concrete capacity\u003c\/strong\u003e, any compatible SDS-Plus core bit or large-diameter masonry bit can be used. Standard round-shank bits are \u003cstrong\u003enot compatible\u003c\/strong\u003e — only SDS-Plus shank bits should be used.\u003c\/p\u003e\u003cp\u003eWhat does the auto-stop carbon brush set do and when does it activate?\u003c\/p\u003e\u003cp\u003eThe \u003cstrong\u003eauto-stop carbon brush set\u003c\/strong\u003e is a motor protection feature built into the HD2-26SE. Carbon brushes are the components that transfer electrical current to the rotating armature inside the motor. Over time, these brushes wear down through normal use. When the brushes reach their minimum safe length, the \u003cstrong\u003eauto-stop mechanism automatically breaks the electrical circuit\u003c\/strong\u003e, cutting power to the motor before the worn brush can damage the armature commutator — a repair that would otherwise be significantly more expensive than a simple brush replacement. The machine will stop operating when this triggers, signalling that the brushes need to be replaced. A \u003cstrong\u003ereplacement carbon brush pair is included\u003c\/strong\u003e in the package.\u003c\/p\u003e\u003cp\u003eCan this machine drill into steel and wood as well as concrete?\u003c\/p\u003e\u003cp\u003eYes. While the HD2-26SE is primarily designed for \u003cstrong\u003econcrete and masonry drilling\u003c\/strong\u003e, it also supports drilling into \u003cstrong\u003esteel up to 13mm diameter\u003c\/strong\u003e and \u003cstrong\u003ewood up to 30mm diameter\u003c\/strong\u003e. For steel drilling, the hammer function should be disengaged (rotation-only mode) and an appropriate \u003cstrong\u003eHSS (High-Speed Steel) drill bit with an SDS-Plus shank adaptor\u003c\/strong\u003e should be used. For wood, a standard wood bit with an SDS-Plus adaptor or a dedicated SDS-Plus wood bit is recommended. Using the hammer function on steel or wood will damage the workpiece and the bit — always select rotation-only mode for non-masonry materials.\u003c\/p\u003e\u003ch2\u003eProblem\/Solution-Oriented Queries\u003c\/h2\u003e\u003cp\u003eThe drill bit is stuck in the chuck and won’t release — what should I do?\u003c\/p\u003e\u003cp\u003eA stuck SDS-Plus bit is usually caused by \u003cstrong\u003edust and debris compacting inside the chuck collar\u003c\/strong\u003e or by the bit being driven too hard into the material, causing the locking balls to bind. First, ensure the machine is \u003cstrong\u003eswitched off and unplugged\u003c\/strong\u003e. Pull the chuck collar back firmly while simultaneously twisting and pulling the bit. If the bit remains stuck, apply a small amount of penetrating oil around the bit shank at the chuck entry point, allow it to soak for a few minutes, then retry. Regularly \u003cstrong\u003ecleaning the SDS-Plus chuck\u003c\/strong\u003e with compressed air and applying a small amount of SDS-Plus grease to the bit shank before insertion will prevent this issue from recurring.\u003c\/p\u003e\u003cp\u003eThe machine has stopped working mid-use — what are the likely causes?\u003c\/p\u003e\u003cp\u003eIf the HD2-26SE stops operating suddenly during use, the most common cause is the \u003cstrong\u003eauto-stop carbon brush mechanism activating\u003c\/strong\u003e, which cuts power when the brushes reach their wear limit. Check the brushes and replace them with the \u003cstrong\u003eincluded spare carbon brush pair\u003c\/strong\u003e if worn. Other causes include: \u003cstrong\u003eoverheating\u003c\/strong\u003e — allow the machine to cool for 10–15 minutes if it has been under continuous heavy load; a \u003cstrong\u003etripped site transformer or RCD\u003c\/strong\u003e — check the power supply; or a \u003cstrong\u003eloose power connection\u003c\/strong\u003e at the plug or cable. If none of these resolve the issue, the machine should be inspected by a qualified electrician or returned for service.\u003c\/p\u003e\u003cp\u003eThe machine is vibrating excessively — is this normal and how can it be reduced?\u003c\/p\u003e\u003cp\u003eSome vibration is inherent to all rotary hammer drills due to the \u003cstrong\u003epneumatic hammering mechanism\u003c\/strong\u003e, and the HD2-26SE's \u003cstrong\u003eSDS-Plus chuck design\u003c\/strong\u003e already decouples much of the impact vibration from the operator's grip by allowing the bit to slide axially. However, excessive vibration beyond normal levels can indicate: a \u003cstrong\u003eworn or damaged drill bit\u003c\/strong\u003e — replace the bit if the tip is blunt or the flutes are damaged; \u003cstrong\u003eincorrect bit seating\u003c\/strong\u003e — ensure the SDS-Plus bit is fully clicked into the chuck; or \u003cstrong\u003edrilling at too low a speed\u003c\/strong\u003e for the material hardness. Always use the \u003cstrong\u003eincluded safety gloves\u003c\/strong\u003e to reduce vibration transmission to the hands, and take regular breaks during extended drilling sessions to comply with vibration exposure guidelines.\u003c\/p\u003e","brand":"Ideal Power Tools","offers":[{"title":"Default Title","offer_id":46293377188055,"sku":"29818","price":240.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0714\/1962\/5687\/files\/IDHD2-26SRE_110V.jpg?v=1782482713","url":"https:\/\/www.idealpowertools.com\/products\/id-hd2-26sre-110v-electric-rotary-hammer-drill-machine-g-110v-29818","provider":"Ideal Power Tools","version":"1.0","type":"link"}